The SMALLRIG Universal Phone Holder Mount review is for creators who want a clamp that can move between a camera and tripod while supporting both portrait and landscape framing.
Its adjustable joints and accessory shoe give it flexibility, with a 500 g load limit to keep in mind when building a setup.
SMALLRIG Phone Holder Review Summary
The quick verdict

2,000+ ratings
Read Amazon ReviewsSMALLRIG Universal Phone Holder Mount
A flexible phone clamp for creators who want to mount a smartphone on a camera or tripod and add a light or microphone.
- Fits smartphones with a width of 57–88 mm.
- Mounts through a bottom 1/4-inch-20 threaded hole or cold shoe.
- Rotates between portrait and landscape orientation and locks after a 90-degree turn.
- Two rotary joints provide up to 180 degrees of adjustment.
Pros
- Offers both a threaded connection and a cold shoe at the base for mounting flexibility.
- Supports portrait and landscape framing with adjustable joints.
Consider before buying
- The 500 g load limit requires buyers to account for the phone and attached accessories together.
- Compatibility depends on phone width, so check the device with its case fitted before buying.
Read the full review summary
This mount combines a phone clamp with a choice of mounting points: a 1/4-inch-20 threaded hole or a cold shoe on the bottom.
That makes it adaptable to camera and tripod setups for vlogging, interviews, photography, and live streaming, while the top cold shoe offers a place for a microphone or light.
The clamp fits phones 57–88 mm wide, and the holder rotates between landscape and portrait orientation, locking after a 90-degree turn. Two rotary joints allow up to 180 degrees of adjustment.
It suits people who want to reposition a phone and attach accessories without switching to a different holder, provided the combined setup remains within the 500 g capacity.
The buying factors
SMALLRIG Phone Holder Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Mounting flexibility
A bottom 1/4-inch-20 thread and cold shoe support more than one mounting approach.
Phone fit range
The 57–88 mm width range covers a broad selection of smartphones, though buyers should check their phone's actual width.
Orientation adjustment
Portrait-to-landscape rotation and two adjustable joints support varied framing.
Accessory support
A top cold shoe and threaded holes are useful for adding a light, microphone, or compatible power-bank holder.
Load capacity
The 500 g maximum calls for attention to the combined weight of the phone and any mounted accessories.
Portability
At 73 g, the holder adds relatively little weight to a mobile camera kit.
Key Features and Specifications of SMALLRIG Phone Holder
- Fits smartphones with a width of 57–88 mm.
- Mounts through a bottom 1/4-inch-20 threaded hole or cold shoe.
- Rotates between portrait and landscape orientation and locks after a 90-degree turn.
- Two rotary joints provide up to 180 degrees of adjustment.
- A top cold shoe accepts a microphone or light; threaded holes can support compatible power-bank holders.
- The holder weighs 73 g and has a maximum load capacity of 500 g.
Pros and Cons of SMALLRIG Phone Holder
Pros
- Offers both a threaded connection and a cold shoe at the base for mounting flexibility.
- Supports portrait and landscape framing with adjustable joints.
- Adds a top cold shoe and threaded holes for accessory expansion.
- Its 57–88 mm clamp width accommodates many smartphone sizes.
Consider before buying
- The 500 g load limit requires buyers to account for the phone and attached accessories together.
- Compatibility depends on phone width, so check the device with its case fitted before buying.
- The package includes the phone holder only; plan separately for a camera or tripod and any lighting or audio gear.
Who Should Buy SMALLRIG Phone Holder?
Good fit
Consider this holder if you move between camera and tripod setups and want the option to mount through either a 1/4-inch-20 thread or a cold shoe.
Its orientation rotation and adjustable joints can help when a shoot alternates between vertical social video and horizontal footage.
It also makes sense for a compact rig that needs a light or microphone on the holder itself.
Before committing, measure the phone with its case and tally the weight of the phone and accessories against the 500 g maximum.
Who should skip it
Skip it if your phone falls outside the 57–88 mm width range or if your complete mounted load would exceed 500 g. A heavier rig calls for a mount with a suitable capacity.
Look elsewhere if your setup depends on a mounting interface other than the listed thread and cold shoes, or if you need a complete filming kit in one purchase; this package is the holder alone.
How the SMALLRIG Phone Holder fits a creator’s rig
Mounting choices for different setups
The base offers a 1/4-inch-20 threaded hole and a cold shoe, so the holder can be attached to a camera or tripod using either connection where the supporting equipment provides a match.
This is useful for creators who switch support gear, but it is still important to confirm that the intended attachment point is available on the camera or tripod.
Framing and orientation
Rotating the clamp through 90 degrees allows a change between landscape and portrait positions, while the two rotary joints provide up to 180 degrees of adjustment.
These features can make it easier to position a phone for different shots; the final composition will still depend on where the camera or tripod is placed.
Adding light and audio
A cold shoe on top provides an attachment point for a microphone or light, and the holder has threaded holes designed to facilitate compatible power-bank holders.
That gives a small rig room to grow, but added equipment contributes to the total load. Keep the full combination within the 500 g maximum.
Checking fit before purchase
The key fit measurement is phone width: the clamp supports devices from 57 to 88 mm wide.
Check the measurement with the case you plan to use, then consider whether the holder and its joints can be positioned as needed in your intended camera or tripod setup.
Alternatives to SMALLRIG Phone Holder
Cell Phone Camera Mounts alternative

700+ ratings
Read Amazon ReviewsSMALLRIG Magnetic Metal Phone Mount
Choose the Universal Phone Holder if you want a width-based clamp that can suit a broader range of phones.
The Magnetic Metal Phone Mount may fit better if you use a supported MagSafe iPhone and prefer its magnetic attachment and detachable top plate; its description warns that external impacts may cause the device to detach.
- The Magnetic Metal Phone Mount is designed for iPhone models with MagSafe functionality.
- It also has a bottom 1/4-inch-20 thread or cold shoe, dual rotating shafts, threaded accessory holes, and a 500 g load capacity; its top round plate can detach for use as a mounting plate.
- The Universal Phone Holder uses a clamp for phones 57–88 mm wide and has a 500 g load capacity, making width and combined rig weight key fit checks.
Is SMALLRIG Phone Holder Worth It?
The SMALLRIG Universal Phone Holder Mount is worth considering for creators who want a compact, adjustable phone clamp with multiple mounting options and room for a light or microphone.
Its 73 g weight and broad stated phone-width range make it a practical candidate for mobile camera rigs.
Check phone width, case fit, the mounting interface on your camera or tripod, and the total load before buying.
If those match your setup, the orientation adjustment and accessory points offer useful flexibility; a phone and accessory combination above 500 g is outside its stated capacity.
Your review at a glance

2,000+ ratings
Read Amazon ReviewsSMALLRIG Universal Phone Holder Mount
A flexible phone clamp for creators who want to mount a smartphone on a camera or tripod and add a light or microphone.
- Fits smartphones with a width of 57–88 mm.
- Mounts through a bottom 1/4-inch-20 threaded hole or cold shoe.
- Rotates between portrait and landscape orientation and locks after a 90-degree turn.
- Two rotary joints provide up to 180 degrees of adjustment.