Product Reviews

SmallRig Super Clamp Review: A Compact Mounting Point for Camera Rigs

A useful choice for camera builders who need a compact clamp with threaded mounting points for attaching gear to compatible supports.

This article contains affiliate links. We may earn a commission if you buy through them, at no extra cost to you.

This SmallRig Super Clamp review looks at a compact way to add a mounting point to a camera setup, with an adjustable jaw and both 1/4-inch and 3/8-inch threaded holes.

It suits makers who want to attach compatible accessories to a bar, shelf, or other support that fits within the clamp’s jaw range.

SmallRig Super Clamp Review Summary

The quick verdict

SmallRig Super Clamp
4.7/5

2,000+ ratings

Read Amazon Reviews

SmallRig Super Clamp

A useful choice for camera builders who need a compact clamp with threaded mounting points for attaching gear to compatible supports.

  • Adjustable jaw opens to about 40 mm and closes to 15 mm, for supports within that thickness range.
  • Includes 1/4-inch threaded holes and a 3/8-inch threaded hole for compatible accessories.
  • Made from aluminum alloy and stainless steel.
  • Rubber pads at the clamp contact points are designed to help prevent slipping and scratching.

Pros

  • Combines a clamp and multiple threaded mounting points in one small piece of rigging hardware.
  • The 15–40 mm jaw range accommodates a variety of support thicknesses within the specified limits.

Consider before buying

  • The jaw range is specific: measure the support before buying, especially if it is near either limit.
  • Only the clamp is included, so a separate arm, ball head, or adapter may be needed for your preferred setup.
Read the full review summary

The clamp’s appeal is its simple combination of a 15–40 mm jaw opening and accessory threads in two common sizes.

That gives a rig builder options for where to secure the clamp and how to attach compatible equipment, while the rubber pads are intended to help protect the contact surface and reduce slipping.

It is best suited to a stationary or carefully arranged camera setup where the support is within the jaw range and the accessory can connect directly or through compatible hardware.

The clamp itself is the only included item, so buyers should account for any ball head, arm, or adapter needed to position their gear.

The buying factors

SmallRig Super Clamp Scorecard

Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.

8/10

Mounting flexibility

The jaw and two threaded hole sizes provide more than one way to integrate the clamp into a rig.

7/10

Jaw range

The 15–40 mm opening covers a useful range of supports, though larger or thinner supports fall outside the described fit.

8/10

Accessory compatibility

The 1/4-inch and 3/8-inch threads can accept compatible camera accessories, including the cited ball head and magic arm.

7/10

Contact protection

Rubber pads are designed to protect surfaces and help limit slipping at the clamping points.

8/10

Portability

At 0.13 kg and described as compact when folded, it is easy to include in a camera kit.

5/10

Out-of-box flexibility

The package contains one clamp, so additional hardware may be needed to position or attach a particular accessory.

Key Features and Specifications of SmallRig Super Clamp

  • Adjustable jaw opens to about 40 mm and closes to 15 mm, for supports within that thickness range.
  • Includes 1/4-inch threaded holes and a 3/8-inch threaded hole for compatible accessories.
  • Made from aluminum alloy and stainless steel.
  • Rubber pads at the clamp contact points are designed to help prevent slipping and scratching.
  • Compact form and listed item weight of 0.13 kg.
  • Package includes one super clamp; no arm or ball head is listed as included.

Pros and Cons of SmallRig Super Clamp

Pros

  • Combines a clamp and multiple threaded mounting points in one small piece of rigging hardware.
  • The 15–40 mm jaw range accommodates a variety of support thicknesses within the specified limits.
  • Rubber pads add a layer of contact protection for compatible surfaces.
  • Light enough to carry with a camera kit and use where a larger support mount would be awkward.

Consider before buying

  • The jaw range is specific: measure the support before buying, especially if it is near either limit.
  • Only the clamp is included, so a separate arm, ball head, or adapter may be needed for your preferred setup.
  • The maximum weight recommendation is 3.3 pounds; buyers should check the combined accessory load and mounting arrangement against that limit.

Who Should Buy SmallRig Super Clamp?

Good fit

Consider the SmallRig Super Clamp if you are building a camera rig and need to attach a compatible accessory to a narrow bar, shelf edge, crossbar, or similar support.

Its two thread sizes and adjustable jaw make it a flexible starting point when your setup already has the required attachment hardware.

It can also make sense as a compact piece of grip hardware for a kit that moves between locations.

Before ordering, check the support’s thickness, confirm the accessory uses a compatible thread, and consider whether you need an articulating arm to get the angle you want.

Who should skip it

Look elsewhere if your support is thinner than 15 mm or thicker than 40 mm, since it falls outside the described jaw range.

Also choose a different mounting approach if your setup requires a complete arm or camera mount in the same package.

How the SmallRig Super Clamp Fits a Camera Rig

Check the support before planning the rig

The jaw range is the first practical constraint: the support needs to measure between 15 and 40 mm thick. Measure the exact clamping point, since a different section of a bar or shelf may have a different profile.

A close fit within the stated range helps you judge whether this clamp can serve as a mounting base for the rest of the setup.

Thread sizes shape your accessory choices

The 1/4-inch and 3/8-inch threaded holes give the clamp useful connection options, but they do not make every accessory directly compatible.

Check the thread on the part you plan to mount and whether it needs an adapter or positioning arm.

SmallRig cites its 1135 ball head and 2070 magic arm as examples of accessories; those are not part of the one-clamp package.

Think through the complete load path

The listed maximum weight recommendation is 3.3 pounds, which gives a limit to consider when choosing attached equipment. The practical setup also depends on the support, how firmly the jaw grips it, and the accessory connection.

For gear near the stated maximum, assess the combined load and arrangement before relying on the clamp.

Match the mount to the shot

A clamp provides a fixed attachment point; the angle and reach of the accessory depend on what you connect to it.

If you need to reposition a camera, light, or monitor, plan for a compatible ball head or arm and check its own load guidance.

If you only need a simple place to secure compatible hardware, the clamp’s compact format may keep the rig straightforward.

Alternatives to SmallRig Super Clamp

Camera Mounts & Clamps alternative

SmallRig Double Ball Head Super Clamp Mount
4.6/5

8,000+ ratings

Read Amazon Reviews

SmallRig Double Ball Head Super Clamp Mount

Choose the reviewed clamp if you want a basic mounting point and already have compatible positioning hardware.

The double-ball-head model is a better fit when you want an included articulated connection and an action camera adapter, while keeping its stated load limit in mind.

  • This clamp mount includes a double ball head, a 1/4-inch screw, and an action camera mount adapter; its clamp is described for rods, tubes, tables, or frames, and the product lists support up to 1.5 kg.
  • The SmallRig Super Clamp offers a 15–40 mm jaw, 1/4-inch and 3/8-inch threaded holes, and is supplied as a clamp only.

Camera Mounts & Clamps alternative

SmallRig 9.8-Inch Magic Arm Clamp Kit
4.6/5

3,000+ ratings

Read Amazon Reviews

SmallRig 9.8-Inch Magic Arm Clamp Kit

The clamp-only model is the simpler option if you already own the arm or need a compact attachment point.

The kit is more suitable when you need an included arm for positioning accessories and want a wider stated jaw opening.

  • This kit pairs a super clamp with a 9.8-inch articulating arm, 1/4-inch screws at both ends, and 360-degree ball-head adjustment. Its clamp opens from 15 to 54 mm.
  • The SmallRig Super Clamp is a standalone clamp with a jaw opening of about 15–40 mm and no included articulating arm.

Is SmallRig Super Clamp Worth It?

The SmallRig Super Clamp is worth considering as a compact, adaptable mounting base for a camera rig. Its 15–40 mm jaw range, two thread sizes, and protective rubber pads cover the core needs of a clamp-only setup.

Buy it when your support fits the jaw and you already have, or plan to add, the hardware needed to position your accessory.

If you need an arm and camera attachment together, one of the bundled mount options may better match that job.

Your review at a glance

SmallRig Super Clamp
4.7/5

2,000+ ratings

Read Amazon Reviews

SmallRig Super Clamp

A useful choice for camera builders who need a compact clamp with threaded mounting points for attaching gear to compatible supports.

  • Adjustable jaw opens to about 40 mm and closes to 15 mm, for supports within that thickness range.
  • Includes 1/4-inch threaded holes and a 3/8-inch threaded hole for compatible accessories.
  • Made from aluminum alloy and stainless steel.
  • Rubber pads at the clamp contact points are designed to help prevent slipping and scratching.

Written by

spikeafricas.com Editorial Team

Editorial team

spikeafricas.com publishes practical how-to guides and educational articles with clear steps and useful context.

Amazon customer reviews

See what buyers think

Explore customer reviews, photos and available video reviews on Amazon.

SmallRig Super Clamp

SmallRig Super Clamp

A useful choice for camera builders who need a compact clamp with threaded mounting points for attaching gear to compatible supports.

  • Adjustable jaw opens to about 40 mm and closes to 15 mm, for supports within that thickness range.
  • Includes 1/4-inch threaded holes and a 3/8-inch threaded hole for compatible accessories.
Check Video Reviews on Amazon