The SmallRig 1138 camera clamp review is for creators who need a compact way to position a small camera or accessory on a nearby support.
Its combination of a clamp, dual ball head, 1/4-inch-20 screw, and action-camera adapter offers flexibility, with a 1.5 kg maximum load to keep in mind.
SmallRig 1138 Clamp Review Summary
The quick verdict

8,000+ ratings
Read Amazon ReviewsSmallRig 1138 Super Camera Clamp
A versatile clamp for creators mounting a lightweight camera or accessory to a compatible rod, tube, table, or frame.
- Maximum load capacity of 1.5 kg.
- Clamp with dual ball head for positioning attached gear.
- 1/4-inch-20 screw for compatible cameras and accessories.
- Action-camera adapter included.
Pros
- Combines the support clamp and adjustable ball-head mount in one accessory.
- Works with several support types, including rods, tubes, tables, frames, and tripods.
Consider before buying
- The 1.5 kg maximum capacity limits it to relatively light equipment.
- For dynamic setups, the guidance recommends attaching a safety rope, adding a precaution to the rig.
Read the full review summary
The 1138 combines a gripping clamp with an adjustable dual ball head, so it can attach to a rod, tube, table, frame, or tripod while positioning a compatible camera, monitor, light, or microphone.
Its aluminum and stainless steel construction, anti-twist design, and non-slip threads are intended to help the setup stay put once tightened.
This design suits creators who want a small mounting point for a lightweight setup in a car, at a desk, or around a camera rig.
The included action-camera adapter broadens the mounting options, but the 1.5 kg maximum capacity and advice to use a safety rope in dynamic settings make it a better fit for deliberate, controlled positioning than rough movement.
The buying factors
SmallRig 1138 Clamp Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Mounting versatility
The clamp can attach to several kinds of supports, and its 1/4-inch-20 screw and action-camera adapter cover common accessory connections.
Angle adjustment
The dual ball-head arrangement allows angle changes before locking the assembly in position.
Load range
The stated maximum is 1.5 kg, so it is aimed at lighter equipment rather than heavier camera rigs.
Grip design
Non-slip threads and an anti-twist structure address movement at the clamp connection.
Material choice
Aluminum and stainless steel give the assembly a metal construction suited to repeated rigging.
Dynamic-use suitability
The product guidance calls for a safety rope in dynamic scenarios, so extra care is part of using it around movement.
Key Features and Specifications of SmallRig 1138 Clamp
- Maximum load capacity of 1.5 kg.
- Clamp with dual ball head for positioning attached gear.
- 1/4-inch-20 screw for compatible cameras and accessories.
- Action-camera adapter included.
- Designed to clamp onto a rod, tube, table, frame, or tripod without drilling.
- Aluminum and stainless steel construction with non-slip threads and an anti-twist structure.
- Compact dimensions of 3.74 × 3.35 × 0.98 inches; listed item weight is 0.2 kg.
Pros and Cons of SmallRig 1138 Clamp
Pros
- Combines the support clamp and adjustable ball-head mount in one accessory.
- Works with several support types, including rods, tubes, tables, frames, and tripods.
- Includes both a 1/4-inch-20 screw and an action-camera adapter.
- Anti-twist structure and non-slip threads are useful design details for keeping a setup aligned.
Consider before buying
- The 1.5 kg maximum capacity limits it to relatively light equipment.
- For dynamic setups, the guidance recommends attaching a safety rope, adding a precaution to the rig.
- Before buying, check that the clamp can fit the diameter and shape of the support where you plan to mount it.
Who Should Buy SmallRig 1138 Clamp?
Good fit
Consider the SmallRig 1138 if you regularly need to place a compact camera, action camera, light, microphone, or similar accessory on a nearby support.
The dual ball head makes it easier to aim the attached gear, while the clamp can be fixed to several common surfaces without drilling.
That combination can be practical for a desk recording setup, a vehicle interior, or a small camera rig.
It is especially appealing if the included action-camera adapter and 1/4-inch-20 connection match equipment you already own.
Check the total weight of the attached setup against the 1.5 kg maximum, confirm that the clamp fits your chosen support, and use a safety rope when the rig will be in motion.
Who should skip it
Look elsewhere if your setup exceeds the 1.5 kg maximum or requires a mount intended for heavy camera equipment.
This may not suit a buyer who wants a mount specifically designed for one fixed camera position or who cannot secure the clamp to a compatible support.
How the SmallRig 1138 Clamp Fits a Compact Rig
A clamp that can go where a stand cannot
The main advantage is the choice of support points: the clamp is designed for rods, tubes, tables, frames, and tripods.
That can help when a full stand is impractical, though the specific support still needs to fit securely in the clamp.
Ball-head adjustment helps with framing
The dual ball head gives the mounted device room to change angle before the clamp is locked.
This is useful when a camera or accessory needs a slightly different view, but buyers should position and tighten the assembly carefully rather than treating adjustability as a substitute for a secure mount.
Keep the payload within the intended range
The stated maximum load is 1.5 kg, which provides a clear boundary for choosing what to attach.
Include the mounted device and any attached accessories when considering the total, and leave margin for a stable setup, particularly if the support or camera will move.
Plan for movement and secondary security
The product guidance specifically calls for a safety rope in dynamic scenarios.
That is a useful reminder for vehicle or moving-rig use: secure the clamp, consider how movement affects the full assembly, and add the rope rather than relying on the clamp alone.
Alternatives to SmallRig 1138 Clamp
Camera Mounts & Clamps alternative

3,000+ ratings
Read Amazon ReviewsSmallRig 2732 9.8-Inch Magic Arm Clamp Kit
Choose the 1138 when its more compact clamp-and-ball-head arrangement and included action-camera adapter suit the setup.
Consider the 2732 if you need a longer arm to extend a device away from the clamp and want both 1/4-inch and 3/8-inch thread options; check its 15–54 mm clamp range against your support.
- The 2732 pairs a super clamp with a separate 9.8-inch articulating arm.
- It has 1/4-inch and 3/8-inch threads, a clamp opening range of 15–54 mm, and rubber cushions on the clamp and arm.
- The 1138 combines a clamp with a dual ball head and includes an action-camera adapter, with a maximum load of 1.5 kg.
Camera Mounts & Clamps alternative

800+ ratings
Read Amazon ReviewsSmallRig 4103 Double Clamp Mount
The 1138 is a more compact choice when one support point and a lighter payload are enough.
The 4103 may fit a buyer who needs a double-clamp arrangement around larger rods and a higher stated load capacity, provided its size and mounting style fit the rig.
- The 4103 has two clamps for securing around rods between 14 and 60 mm in diameter, 360-degree adjustment, and a stated maximum load of 3.5 kg.
- The 1138 uses one clamp point and supports a maximum load of 1.5 kg.
Is SmallRig 1138 Clamp Worth It?
The SmallRig 1138 is worth considering for creators who need an adaptable clamp mount for a lightweight camera or accessory. Its support options, dual ball head, and included action-camera adapter make it a flexible piece of small-rig hardware.
Buy it if your gear stays within the 1.5 kg maximum and you can confirm a secure fit on the intended support.
For moving setups, follow the safety-rope guidance; for heavier or more specialized mounting needs, choose a mount built around those requirements.
Your review at a glance

8,000+ ratings
Read Amazon ReviewsSmallRig 1138 Super Camera Clamp
A versatile clamp for creators mounting a lightweight camera or accessory to a compatible rod, tube, table, or frame.
- Maximum load capacity of 1.5 kg.
- Clamp with dual ball head for positioning attached gear.
- 1/4-inch-20 screw for compatible cameras and accessories.
- Action-camera adapter included.